Two Brothers – Comp-S 2-into-1 Exhaust – Stainless Steel with Carbon Fiber End Cap | Sportster | 14+

$1,459.00

Stock take is updated regularly but please check before ordering.

Please add any motorcycle modifications such as exhaust type, whether full system or de-cat system, filter etc.
Please Note: - It is your responsibility to ensure you have provided all relevant make and model details and that they are accurate. Dynobike will in no way be held responsible for any modifications made to your ECU whatsoever. This will void most warranties. This modification is not for public roads or highway use and does not comply with emission and noise regulations for Australia. Suitable for closed circuit track use only. It is illegal for restricted license holders to ride modified a motorcycle on public roads. Dynobike Pty Ltd is not responsible for any damages, problems, or fees associated with the tampering of emissions and noise controls.
Please tick the box to agree

Description

Note:  Fits Sportster 2014-2021

Product Details

Comp-S 2-1 Features:

* Dyno tuned for maximum performance.

* Swept-up muffler for enhanced ground clearance.

* Carbon fiber end cap.

* Mandrel bent stainless steel tubing.

* All TIG welds done by hand.

* High-temp SS wool and packing material.

* Fits with forward and mid controls.

* Available in brush stainless steel finish

* Accepts stock O2 sensor, as well as aftermarket wide band (18mm) sensors.

* Simple, clean, and functional heat s hields included.

* Drops weight.

Tech Tips:-

* On models fitted with OEM Forward Controls the front header should be tucked in close to the frame well clear of the brake pedal & Brake rod attachment point

* Rotate the rear header outwards (front header Inwards) so the collector of the muffler angles outwards

* Installing the muffler loosely first will help get the proper alignment

* Be conscious of not inserting the header pipes too far into the muffler – part icularly on the rear

* Keep the front and rear headers & muffler loose until fitted.

* Tighten the exhaust using the Industry standard tightening sequence.

* Fit the springs last

Proudly Made in the USA!

Tech Tip:

========

This system requires keeping the oem bracket.

(If already fitted with aftermarket exhaust that removed it /

requires finding another!)

Subscribe
Notify of
guest
Inline Feedbacks
View all comments
Make Model Year
Harley Davidson All Models (Check) 2014 - 2021